GB-9
Intermediate position for roller
shutter/awning/venetian blind
GB-10
GB
Intermediate position for roller
shutter/awning/venetian blind
Programming Pos
B
Prerequisite
: The transmitter has been programmed and the end limit
positions have been set. The roller shutter/awning/
venetian blind is in the upper end limit position.
1. Adjust the roller shutter/awning/venetian blind into the desired
position using the
DOWN
button.
Note:
Keep the
DOWN
button pressed until the desired position
is reached.
2. When the roller shutter/awning/venetian blind has reached the
desired position, press the
STOP
button
in addition
.
The curtain/canopy/blind will come to a stop. The intermediate
position has been successfully programmed.
Programming Pos
V
Prerequisite
: The transmitter has been programmed and the end limit
positions have been set. The roller shutter/awning/
venetian blind is in the upper end limit position.
1. Move the roller shutter/awning/venetian blind in the
UP
direction
using the handheld transmitter until the ventilation slits are open
or the reverse position has been reached.
Note:
Keep the
UP
button pressed until the desired position is
reached.
2. When the roller shutter/awning/venetian blind has reached the
desired position, press the
STOP
button
in addition
.
The roller shutter/awning/venetian blind will come to a stop. The
ventilation/reverse position has been successfully programmed.
Roller shutter
Awning
Venetian blind
Pos
B
Intermediate Intermediate
Intermediate
position
position
position
Pos
V
Ventilation position
Canopy tension
Reverse position
Adjustment to Pos
B
Prerequisite:
The transmitter has been programmed.
1. Press the
UP
button twice
in quick succession
.
2. The drive will adjust the roller shutter/awning/venetian blind
into the stored intermediate position. If no intermediate
position is stored, the roller shutter/awning/venetian blind is
automatically adjusted into the lower limit position.
Adjustment to Pos
V
(roller shutter, awning)
Prerequisite:
The transmitter has been programmed.
1. Press the
UP
button twice
in quick succession
.
2. The roller shutter/awning is adjusted into the stored ventilation
position. If no ventilation position is stored, the roller shutter/
awning is automatically adjusted into the upper limit position.
Adjustment to Pos
V
(venetian blind)
Prerequisite:
The transmitter has been programmed.
1. Press the
UP
button twice in
quick succession
.
2. The venetian blind is adjusted into the stored reverse position.
If no reverse position is stored, the venetian blind is
automatically adjusted into the lower limit position.
Deleting Pos
B
1. Press the following buttons
simultaneously
:
•
DOWN
button
•
STOP
button
2. Keep these two buttons pressed until the LED goes out briefly.
Deleting Pos
V
1. Press the following buttons
simultaneously
:
•
UP
button
•
STOP
button
2. Keep these two buttons pressed until the LED goes out briefly.