RolMotion M Roller Blind Drive
138251001_EN_1219
RolMotion M Roller Blind Drive
1
Operating and assembly instructions
Follow these instructions for safe and proper use. Observe
all assembly instructions. Incorrect assembly can lead
to serious injuries. Please keep this operating manual
for future reference to ensure that it can be accessed
throughout the entire service life of the product!
The German operating manual is the original version.
All documents in other languages are translations of the
original version.
All rights reserved in the case of patent, utility model or
design registrations.
2
General information on these
instructions
The content structure is based on the life cycles of the electric
motor drive (hereinafter referred to as “the product”).
The manufacturer reserves the right to make changes
to the technical data in these operating instructions. In
some cases, this technical data may differ from those of
the respective product version; however, the functional
information will not undergo significant changes or become
invalid. The current version of the technical specifications
may be requested from the manufacturer at any time.
No claims may be asserted against the manufacturer
as a result of this provision. Deviations from textual or
visual statements may occur depending on the product's
technical development, features and accessories. Deviating
information for special versions will be provided by the
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
2.1 Standards and guidelines
During construction, the fundamental health and safety
requirements were applied and provision was made for the
appropriate legislation, standards, directives and guidelines.
The safety of the product is confirmed by the declaration
of conformity (see EC Declaration of Conformity). All
information relating to safety in these operating instructions
refers to the laws and regulations that are currently valid
in Germany. All information in these operating instructions
must be complied with at all times and without limitation. In
addition to the safety notes in these operating instructions,
the regulations on accident prevention, environmental
protection and occupational health and safety applicable at
the location of use must be observed and adhered to. The
regulations and standards for safety assessment can be
found in the EC Declaration of Conformity.
Contents
1
Operating and assembly
instructions
1
2
General information on these instructions 1
2.1
Standards and guidelines
1
2.2
Intended use
2
2.3
Foreseeable misuse
2
2.4
Warranty and liability
2
2.5
Customer service provided by the manufacturer 2
3
Safety
2
3.1
General safety instructions
2
3.2
Layout of safety instructions
2
4
Product description
3
4.1
Product contents
3
4.2
Accessories
3
5
Assembly
3
5.1
Mechanical fastening
4
5.2
Electrical connection
4
5.3
Connection example for RolMotion M
230 V / 50 Hz
5
5.4
Parallel circuit
5
5.5
Commissioning
5
5.5.1 Connection for assembly cable
5
5.6
Setting the end positions
5
5.6.1 Changing/deleting the end positions
5
5.6.2 Four variants of end position settings
5
5.6.3 Variant A: Upper and lower end position
freely adjustable
6
5.6.4 Variant B: Fixed upper limit stop, lower end
position freely adjustable
6
5.6.5 Variant C: Fixed upper and lower limit stop
6
5.6.6 Variant D: Upper end position freely
adjustable, fixed lower limit stop
6
5.7
Placement of roller blind slats
7
6
Travel profiles
7
6.1
Travel profile default mode
7
6.2
Travel profile whisper mode
7
7
Troubleshooting
7
8
Servicing
7
9
Service/manufacturer's address
7
10
Repairs
7
11
Disassembly and disposal
7
12
Comments on EU Declaration of Conformity 8
13
Technical data and dimensions
8
13.1 RolMotion M
8
