USA-15
USA-16
Explanation of functions
INTERMEDIATE POSITION
The intermediate position is a position of the roller shutter/blind
between the upper and lower limits that can be freely selected.
This position can also be reached from the upper position after
programming.
Press the
DOWN
button
twice
in rapid succession to move to the
intermediate position.
When the system is in venetian blind mode, it is also possible to pro-
gramme a reverse position. In this case, this command will be auto-
matically executed following the intermediate position command.
VENTILATION/REVERSE
The ventilation/reverse position is a position of the roller shutter/
blind between the upper and lower limits that can be freely selected.
Using this function, you can raise the shutter from the lower end
limit until the ventilation slits are open. The slats of the blind will be
turned.
Press the
UP
button
twice
in rapid succession to move to the ventila-
tion/reverse position.
PROG 1/PROG 2
PROG 1 END LIMIT/PROG 2 END LIMIT
With the setting PROG 1 END LIMIT/PROG 2, the drive moves into the
lower limit position according to an automatic control command
b
executed via the menu level PROG 1/PROG 2 END LIMIT.
INTERMEDIATE POSITION
With the setting PROG 1/PROG 2 INTERMEDIATE POSITION, the drive
moves into the pre-set intermediate position according to an
automatic control command
b
.
VENTILATION/REVERSE
With the setting PROG 1/PROG 2 VENTILATION/REVERSE POSITION,
the drive first moves into the lower limit position and then into the
ventilation/reverse position according to an automatic control
command
b
.
US
A
Explanation of functions
SETTING
The SETTING menu gives you the following options:
• HOLIDAY
• SUN (when sensor is connected)
• TWILIGHT SETTING (when sensor is connected)
• INTERMEDIATE POSITION
• VENTILATION/REVERSE
• PROG 1 (END LIMIT, INTERMEDIATE POSITION,
VENTILATION/REVERSE)
• PROG 2 (END LIMIT, INTERMEDIATE POSITION,
VENTILATION/REVERSE)
• TEST MODE
• Language (ENGLISH GB)
• ASTRO SHIFT
v
• ASTRO SHIFT
b
• City (LONDON)
• LONGITUDE
• LATITUDE
• TIME ZONE
• SUMMER/WINTER (automatic clock adjustment for
daylight saving changes)
To set a function, press the
OK
button until you come to the
required menu level.
HOLIDAY SETTING
The holiday setting simulates an occupied house while you are on
holiday.
If the function is activated (ON), the roller shutter/blind varies
randomly from the programmed times (max. + 30 mins.).
END LIMIT
The end limit is the point where the roller shutter/blind is in the
upper or lower position.
Only when EXPERT
MODE is
ON
.
k
