Ⓒ
elero GmbH
EN | 17
16 | EN
Ⓒ
elero GmbH
Synchronous programming mode
4
Set second hit
:
Prerequisite
:
First hit has been set.
Immediately
after the light
source with the
opposin-
g
intensity lights up, push
the [
OPEN
▲] button
or
[
DOWN
▼].
•
If luminous intensity is
high (100%) press the
[
OPEN
▲] button.
•
If luminous intensity is
low (30%) press the
[
DOWN
▼] button.
Hit successful
:
The light source
goes out
permanently
and indica
-
tes that the programming
procedure is over.
Hit failed:
The light source
does not
go out
.
→
repeat action in
"Set second hit"!
•
Programming can only ever be performed in one
selected channel.
•
When programming is complete or after 5
minutes has
passed, the receiver will revert to normal operation.
•
Programming mode can be stopped by pressing the
[
STOP
■
] button for at least 6 seconds.
•
Up to 16 transmitters can be programmed.
•
Several receivers can be programmed to one channel.
•
If more than 10 receivers at once are in programming
mode, the transmitter changes to group program
-
ming mode. Once programming is complete, group
programming mode has to be terminated manually in
the transmitter by pressing the [
STOP
■
] button for at
least 6 seconds.
6
General control options
General control options
Key(s)
Press
Action
[
OPEN
▲]
Short
Light source is off:
Set the last brightness
value
Light source is on:
Reduce dimming slightly
[
OPEN
▲]
Long
Reduce dimming
[
OPEN
▲]
2 x short
Set maximum user-defined
brightness value
(Standard: 100%)
[
DOWN
▼]
Short
Light source is off:
Set the last brightness
value.
Light source is on:
Increase dimming slightly.
[
DOWN
▼]
Long
Increase dimming
[
DOWN
▼]
2 x short
Set lowest user-defined
brightness value
(Standard: 10%)
[
STOP
■
]
Short
Switch off light source
[
UP
▲] +
[
STOP
■
]
Short
Save current brightness
value as the maximum
user-defined brightness
value
[
UP
▲] +
[
STOP
■
] Longer
than 6
seconds
Delete maximum user-de
-
fined brightness value and
restore standard value