Manuale d’uso e manutenzione
3. ISTRUZIONI PER L'USO
Pag. 38
Ufficio Tecnico TEL: +39 0532 829 965 - FAX: +39 0532 829 177
E-Mail: [email protected]
3.3.2.1. Setup Menu
>> Audio IN Mode
From this window it is possible to select the type of audio signal of the corresponding input
(Audio IN)
The possible regulations are:
- Selection of the audio input impedence of the unit (600 Ohm or 10 KOhm)
- Selection of the pre-emphasis (OFF - 50 uS - 75 uS) which is active only on the Mono
input
- Selection of the audio signal type ( MPX or Mono). If option 02 is installed, it is possible
to select also the “AUTO” mode which automatically recognise the type of signal used
(MPX or Mono)
Press key P1 to select the input impedence of the audio signal
Press key P2 to select the type of pre-emphasis
Press key P3 to selelct the type of audio signal
Press key P5 to go back to the previous menu (Setup Menu)
ELT100-A
P1
P2
P3
P4
P5
OUT
ONITOR
UHF LINK TRANSMITTER
