Elenco Electronics Snap Circuits Jr. Select, Инструкция по эксплуатации

Страница: 26 / 56

Project 45 Mind Reader Game
Build the circuit below. It uses the red jumper
wire and a 3-Snap Wire as “shorting bars”.
Setup: Player 1 sets the target by placing the 3-
snap shorting bar under the paper on column 2,
3 or 4. Player 2 must NOT know where the
shorting bar is located under the paper.
The object is for Player 2 to guess the location
by placing the loose end of the red jumper wire
on the 5-snap wire at positions A, B, or C and
then pressing the press switch (S2). If Player 2
places the red jumper wire at the correct position,
the sounds played indicates a “hit”. He keeps
guessing until he hits. After each hit, remove the
3-snap shorting bar and slide the switch off and
on to reset the sound.
Player 2 then sets the 2, 3, 4 side and player 1
tries his luck.
Play multiple rounds and see who gets the best
overall score. The winner will be the player who
is best at reading his opponent’s mind.
Paper Sheet to
hide position of
shorting bar
A B C
-25-
SC-130_050115.qxp 5/14/15 11:46 AM Page 26