-7-
Figure G
Figure H
Figure I
FINAL ASSEMBLY
Attach and solder the logic probe tip to the foil side of the PC board as shown in Figure G.
Solder the power cord to the foil side of the PC board as shown in Figure H. The red wire goes to the pad
marked J2 and the black wire goes to the pad marked J3.
Tip
Foil Side of
PC Board
Solder
Foil Side of
PC Board
Power Cord
Red
Black
Tab
Tab
Mount the PC board onto the bottom case aligning the two
tabs with the two holes in the PC board (as shown in
Figure I). Then, snap the top case on.
Top Case
Bottom Case
Figure E
Insert the IC socket into the PC board
with the notch in the direction shown on
the top legend. Solder the IC socket into
place. Insert the IC into the socket with
the notch in the same direction as the
notch on the socket.
Notch
IC
Socket
PC Board
Figure F
Mount the LED as shown with the black tubing spacers. Be sure that
the flat side is in the same direction as marked on the PC board.
7/16”
5/16”
Flat Side
Long
Lead
Flat Side
Black
Tubing
Black
Tubing
