CONTROLS
RANGE SWITCHES
Six ranges of frequency are provided by the range switch as shown in Table 1.
Table 1
SINE/TRIANGLE SWITCH
This SINE/TRIANGLE Switch selects the waveform, sine wave or triangle wave, sent to the SINE/TRIANGLE
output terminal.
FREQUENCY MULTIPLIER
The multiplier is a variable control allowing frequency settings between fixed ranges. The ranges are as shown
in Table 1.
AMPLITUDE CONTROL
The Amplitude Control provides amplitude adjustment from near 0 to 3V or greater for both sine and triangle
waveforms.
ON/OFF SWITCH
The ON/OFF Switch turns the power to the FG-600 on or off.
OUTPUT TERMINAL
The output marked SINE/TRIANGLE provides the sine and triangle waveforms. The output marked SQUARE
WAVE provides the square wave. The output marked GND provides the ground for all output waveforms.
POSITION
TYPICAL FREQUENCY RANGE
1
1Hz - 15Hz
2
10Hz - 150Hz
3
100Hz - 1.5kHz
4
1kHz - 15kHz
5
10kHz - 150kHz
6
100kHz - 1MHz
-12-
