-9-
4. Mirror/Light
r
Install the battery using the instructions on page 13.
r
Check the light by pressing the metal tab in. If it doesn’t light,
check the battery polarity.
r
Install the round mounting ball into the hole on the arm as
shown in Figure 11, pressing firmly in.
r
Snap the lamp bracket onto the round mounting ball.
Caution:
The round posts on the lamp assembly are not the
same size. The same is true for the holes in the lamp bracket.
r
Install the larger post into the side of the bracket with the larger
hole. Then, pull slightly on the lamp bracket, spreading it apart,
and slip the smaller post into the smaller bracket hole.
Figure 11
Mounting ball
Figure 12
Lamp assembly
Metal tab
Small post
Large post
Lamp bracket
Lamp bracket
(Front view)
Large tab up
EDU-37723_Manual_050115.qxp_Layout 1 6/22/15 3:14 PM Page 10
