Elenco Electronics AK-540 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 20

Elenco Electronics AK-540 Скачать руководство пользователя страница 12

-11-

6. E Parts: Assemble the E parts as shown in
Figure E.

Note that E1 and E2 have curved

shapes and must be positioned properly or the
viewfinder will give a distorted picture. E1 may be
loose at this time, just be sure it is in position when
you install F4 (the front case). You should install
E3 into E4 and then install them onto the main
assembly together, since installing E4 to the main
assembly when E3 is already there will be difficult.
E4 is secured with four snap holes on the sides
and one G2 screw on the bottom (note: the screw
is not used on all models).

7. Test It:

Now is a good time to test your

assembly. Press down on shutter release D5 (to
take a picture) and you should hear a click as D1
(the lens shutter) rocks back and forth briefly
allowing light to pass to the film area. If the back
cover is open then you should see the shutter D1
open for an instant and then close (if not then
check your assembly of the D parts). You should
now be able to turn A9 (the film advance knob)
around once to the right. Do this several times to
make sure the shutter release and film advance
mechanisms work smoothly.

The film counter

should advance one count each time the film is
advanced. If you open the back cover then the film
counter will be reset. If something is wrong then
check your assembly above or refer to the
troubleshooting section.

Figure E

E4

E3

G2

E2

Curved side of E2
is towards E1.

Install E3 into E4
before installing E4
into main assembly.

E1

«
...
10
11
12
13
14
...
»

Содержание AK-540





















Отзывы:

Нет отзывов