Elenberg SPT-7080, Инструкция по эксплуатации

Страница: 33 / 48

33
2. Under swing up and down mode, when the status is switched from off to , if
press this button again 2s later, status will switch to off status directly; if press
this button again within 2s, the change of swing status will also depend on the
circulation sequence stated above.
Switching between Fahrenheit and centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch ºC and
ºF.
Function of defrosting
It indicates: after starting this function by remote controller and the unit has been
under defrost status, If turn off the unit by remote controller, the unit will not stop de -
frosting until it is finished; if change setting mode by remote controller, the function
,which is set last time, won’t be carried out until defrosting finished.
Operation of this function on or off: If remote controller is under off status, press mode
button and blow button simultaneously in order to enter or cancel this new function.
If the unit is under defrost mode, dual eight position on remote controller will display
H1 in this case, press +/- button, H1 will disappear and setting temp. be displayed.
After remote controller is powered on, the new defrost function will be defaulted to
be closed.
changing batteries and notices
The wireless remote control adopts two new AAA 1.5 V
dry batteries.
1. Slide the cell cover downward to take out the worn
cells, then change 2 new ones (note to the correct po -
larity).
2. Cover the cell cover.
NOTE:
• When changing the batteries, do not use the old or dif -
ferent batteries, otherwise, it can cause the malfunc -
tion of the wireless remote control.
• If the wireless remote control will not be used for a long
time, please take them out, and don’t let the leakage
liquid damage the wireless remote control.
• The operation should be in its receiving range.
• It should be placed at where is 1m away from the TV set or stereo sound sets.
• If the wireless remote control can not operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.