Elenberg HT-115, Руководство пользователя

Страница: 28 / 39

28
MENU OPERATION:
Press SETUP key, screen show setup page. In setup mode, press SETUP key
again to quit the setup page. Press direction key to the desired item, press
ENTER to confirm.
(1) Some setup items are concerning the present modes. The items in gray
can’t be set up.
(2) The setup is memorized and kept after power off.
GENERAL SETUP PAGE:
• TV Display
Normal/PS: When the unit connects to the normal TV set, the wide-
screen image shows on the full screen, but some part is cut off.
Normal/LB: When the unit connects to the normal TV set, the wide-
screen image shows and black bars appear on the top and bottom of
screen.
Wide-screen: Use this item when the unit is connected to the wide-
screen TV set.
• ANGLE MARK
It will show the ANGLE mark when playing DVD disc with multi-angle
view if selecting ON
• OSD LANG
Select on-screen display language
• CAPTIONS
This function doesn’t work when the disc without caption. If the caption
is OFF, press SUBTITLE key on the remote controller to make caption on.
The default setup is CAPTION ON.
• SCREENSAVER
If the SCREEN SAVER is set ON and the unit is switched on without a disc
playing for several minutes, a moving picture appears on the screen and
the unit will go to standby mode after 20 minutes. You can press the
STANDBY key on the remote control to activate.
• LAST MEMORY
When this function is on, the unit can memorize the time elapsed from
the last time you played the disc. Then at the next playing, it will resume
playing from the memorized time.
SPEAKER SETUP:
• DOWN MIX
LT/RT: The audio out is Left and Right channel formatting even if the
original sound is 5.1CH format.
STEREO: The audio out format is stereo even if the original sound is
5.1CH format.
SURROUND: The audio out is virtual surround sounds (only for 5.1CH
player)
OFF: Turn off downmix function. If playing 5.1CH discs or the unit is con -
SYSTEM SETUP