OPERATION INSTRUCTIONS
-4-
TUNING PROCEDURE
STEP 1
Push the Power "ON/OFF" Switch to the ON Position, the "POWER" Indicator will light up. A few seconds
later the picture(or blue screen) will appear The program number is display on the top right-hand corner of
the screen.
STEP 2
FULL AUTO SEARCHING
1. Press the MENU key on your TV set (or remote handset) .If it is in AV state, it will not display "TUNING" .
2.You can select "TUNING" by pressing PROG.+/-buttons .Then press VOL.+/-buttons to enter into
TUNING submenu .
3.Press PROG.+/- Buttons to select "AUTO TUNING " then press VOL. +/- Button to automatically search
and memory all the broadcasting TV stations in your area. When presetting is complete, the initial position
number will reappear.
4. Press the MENU key twice to go back to the normal TV mode.
TUNING
POSITION 3
AUTO TUNING
MANUAL TUNING
SKIP ON
BAND VHF-H
FINE TUNING
Press PROG.+/-
Buttons
Press PROG.+/-
Buttons
Press MENU key twice
Press VOL.+/-
Buttons
Press VOL.+/-
Buttons
Begin auto tuning
TO SKIP A PROGRAM
You may skip any program number by following the steps below:
1.Select the program number to be skipped by pressing PROG+/- button or direct select buttons .
2.According to above mentioned steps, open the TUNING menu.
3.Press PROG+/- Buttons to select "SKIP", then select "ON" with VOL.+/- Buttons.
4.Press the MENU key twice to go back to the normal TV mode.
Remark: You 'd better select correct color and sound system for the first channel before searching.
3
£-
+
TUNING
POSITION 3
AUTO TUNING
MANUAL TUNING
SKIP ON
BAND VHF-H
FINE TUNING
3
£-
+
1
Press MENU
Buttons
MENU
PICTURE
SOUND
TUNING
SELECT: ENTER:- +
EXIT : MENU
COLOR SYSTEM
SOUND SYSTEM
MENU
PICTURE
SOUND
TUNING
SELECT: ENTER:- +
EXIT : MENU
COLOR SYSTEM
SOUND SYSTEM
