Elenberg CTV-1540, Инструкция по эксплуатации

Страница: 37 / 47

Basic Operation
37
Preset up TV channel
Program Editing
1. Press the menu key of the TV set or remote control, and press the PROG / key to select
«tune» menu, and press the VOL / key again to enter the menu.
2. Press the PROG / key to select «Prog Edit» item , and press the VOL / key of TV set or
remote control, with the following menu on the screen:
1) Number of Current Program
Press the VOL
/ key to select the number of current program.
2) Skip
To skip the number of current program, press the PROG
/ key to select the skip item, and press
the VOL / key to select «ON».
3) Program Change
To swap the current program to a program number, press the PROG
/ key to select the number
for change, and press the VOL / key to set up the change number, and press the PROG / key
to select program swap, and then press the VOL / key to swap.
4) Resume the Skipped Program
To resume a skipped program, it can press the digit key and select the number of TV program for
resuming. For details on how to select the digits of TV program, please refer to Page 11 «use direct
selection key». After the program number is selected, repeat Step 1 and 2 in above, and press the
PROG
/ key to select the skip item, and press the VOL / key to select «OFF».