EN
English - 8.
2.9 Specific danger
– When adjusting the height of the table there is danger of injury. Make sure that there is no-one
else in the immediate surroundings of the table.
– When assembling the table, make sure there is ample space to avoid collision (i.e. inclination
of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable directions.
– Make sure there is ample space to avoid collision if there are objects on the work surface such
as computers or computer peripherals.
– Make sure there is clearance of at least 25mm from all other furniture, all around the table.
2.10 In an emergency
– Have the table repaired by specialists. Refrain from using the table until it has been success-
fully repaired.
– Stop using the table at once if you notice anything unusual (strange sounds, smoke, etc.).
2.11 Maintenance and upkeep
– Do not perform any repairs on the work station table or other components yourself.
– Do not alter the construction of the work surface or its frame.
– Any faulty components removed must be replaced with new, original components from the
manufacturer. Use only original replacement parts made by the manufacturer. Have any such
work carried out by a specialist, making reference to this assembly/operating manual.
2.12 Cleaning
– Dust the table once a week with a dry cloth.
– Clean the table with a damp cloth and a weak solution of cleaner once a fortnight.
2.13 Persistent risks
This table has been built to the state of the art and to recognized safety regulations. Nonetheless,
its use may constitute a risk to the health and safety of users or third parties, damage to the table
or to other items. The table must be used only:
– for the purpose for which it was intended.
– if it is completely safe to do so.
