esca User’s Manual v1.2
The first operation is to load a configuration file to initialize the software for the ESCA
devices.
This file contains all the necessary setups to communicate with the ESCA hardware.
The configuration file is loaded by clicking on the
“Open Config”
button. The
configuration file is
ESCA_xxx.cfg
where
xxx
is the firmware version of your ESCA
device. The configuration file is located in the EDR installation folder (usually
C:\Program Files (x86)\Elements Data Reader).
G
RAPHICAL
U
SER
I
NTERFACE
After loading the config file, the GUI appears as follows:
