Element ESB204, Инструкция по эксплуатации

Страница: 7 / 12

1
2
3
4
5
6
7
8
PREPARATIONS FOR START
Select the input source. The active source Indicator LED will illuminate
or flash (flash only applies to bluetooth non
-
activate status).
SOURCE BUTTON
VOL- BUTTON
VOL+ BUTTON
BLUETOOTH
INDICATOR
9
1 2 3 4
5
6 7 11 8
9
10
Press to turn Sound Bar on or off. The indicator light is orange in the
standby mode, and it will turn off when the system is on.
Note: If the channel has no input signal or any operation in 15 minutes,
the device will automatically go into the Standby mode.
POWER BUTTON
Bluetooth button. If the device is not in bluetooth mode, press this button
to force the device into bluetooth mode; if connected, it will disconnect
immediately and enter into the pairing mode when you press the button.
POWER: The power indicator is always on in the standby mode, and it will
turn off when the system is on.
AUX IN: AUX IN indicator, in aux input this light will illuminate.
LINE IN: LINE IN indicator, in line in input this light will illuminate.
OPTICAL: OPTICAL indicator, in optical input this light will illuminate.
10
: BLUETOOTH indicator, in bluetooth input this light is on if the device is
connected; if it is unconnected, the light will flash.
TOP PANEL FUNCTION
TOP PANEL
TOP PANEL BUTTONS
VOLUME INDICATORS:
7 to 11 these LEDs light as you adjust the
Sound Bar volume levels. The volume has 32 level settings, when it's
maximum, these five indicators will light on together for a while; when it's
minimum, the AUX IN indicator will illuminate for a while. These indicators
will illuminate according to the volume levels.
6