Element ELEFW247, Инструкция по эксплуатации

Страница: 24 / 28

22
• Press the SOURCE button on the
main unit or on the remote control
then press the
buttons to select
the USB mode and then press OK
button.
• Press the buttons to select
photo and then press OK button.
File format supported: JPEG.
Operation Tips
Press to start or pause the photo playback.
Press to stop photo playback.
Press to view the previous photo.
Press to view the next photo.
REPEAT Press to select different repeat mode.
Viewing Pictures
USB MULTIMEDIA
If your TV does not operate normally or cannot be turned on, please check
the following troubleshooting questions. Remember also to check any other
connected electronic device, such as DVD or blu-ray player to pinpoint the
problem. If the TV still fails to operate normally, please contact technical support
(Refer to Warraty page).
SYMPTOM POSSIBLE CAUSE REMEDY
Dead. No LED lit No power to the TV.
• Check all connections to the
TV's AC socket.
Dead. No LED lit red Set in standby mode.
• Press either the Power button
or the Standby button on the
remote control.
Blue screen
No signal.
• Press the SOURCE button to
select the correct source.
Incorrect
source selected.
Noisy, snowy, ghosting
picture(TV)
Poor antenna signal.
• If using an indoor antenna, try
adjusting the antenna position.
Check antenna connections.
No sound
Sound "Mute". • Turn sound "Mute" off.
Volume set too low. • Check volume settings.
External leads
not connected "if used". • Check that all external leads
are connected properly.
Troubleshooting
USB
C:
Phot
C:\PICTURE\
..
2010100.jpg
2010101.jpg
2010102.jpg
2010103.jpg
Play File :0
Select Move Repeat
002/005
Total size:3.8 GB
Unused size:3.7 GB
2010100.jpg
1024 x686 229.0KB