5.0 REMOTE CONTROL FUNCTION
page 13
1. To command the matrix locally, setup the remote control ID with the
same code of the Matrix (see 4.2). The default code is 4. (Power+4)
2. Warning: These settings have to be done the first time you use the remote or
when you change the batteries.
3. IR ID setup: press and hold POWER button, then press Number key to save.
Remote Control Buttons
Symbol Function
ON/Standby (same as matrix)
Left (same as matrix)
Right (same as matrix)
Up (same as matrix)
Down (same as matrix)
Confirm (same as matrix)
Menu (same as matrix)
Quick
key1
Quick
key2
Quick
key3
Quick
key4
Quick
key5
Quick
key6
Quick
key7
Quick
key8
Quick
key9
Quick
key10
EDID (same as matrix)
OFF (same as matrix)
For example: to connect output port 1 to input port 4, press the quick key 1 (OUTPUT 1) and
then press the quick key 4 (INPUT 4).
**IR remote can only power on the matrix at standby mode.
Содержание ELE9096
Страница 1: ...4K x 2K HDMI 10x10 Matrix Switch ELE9096 USER MANUAL ...
Страница 22: ......