the upper side of the hood into the hole on the cabinet shell, and finally fix the four screws of the hood.
2.
Changing the door gasket
Tear off the door gasket corner from one side, remove the door gasket in the desired direction, and
replace it with a new one, paying attention that the side with hole should be placed at the lower side;
finally, squeeze the gasket with hand to ensure that all are installed in place.
V.
Common faults analysis
1.
Troubleshooting
⚫
If the compressor does not work but the light is working normally, please check whether the power cord
(or the compressor connecting wire) is well connected.
⚫
If the refrigerator circuit is normal, please check the resistance of the thermostat.
2.
Running check
⚫
Close the door after it runs for 30 minutes, if the freezer compartment temperature drops significantly, it
indicates the refrigerator system is working properly. After running a period of time, the freezer thermostat
will automatically set temperature within the startup range.
⚫
The marks on the temperature control knob indicate the temperature level, rather than the exact
temperature. “Off” stands for “ Power Off” and “5’ stands for the minimum temperature