Element E3 F Series, Руководство по установке

Страница: 4 / 8

4
Install Drywall or Suspended Ceiling
3C
Run the power line wires into the housing electrical box.
Connect the neutral power line wire to the white
transformer wire with a wire nut.
If using a dimmer, connect the hot power line wire to the
yellow transformer wire with a wire nut.
Make sure that
the black transformer wire is disconnected, capped with
a wire nut.
If using a switch, connect the hot power line wire to the
black transformer wire with a wire nut.
Make sure that the
yellow transformer wire is disconnected, capped with a
wire nut.
Make sure that housing is grounded in accordance with
local electrical codes.
Replace the electrical box cover. Make sure that the top
edge of the cover snaps under the tab.
3
4
5a
5b
5b
5a
5a
5b
6
4
4
6
6
7
4A
For round trims , mark a 3-7/8" diameter circle on drywall.
Cut out the marked section.
For square trims , mark a 3-7/8" square on drywall. Cut out
the marked section.
1
3-7/8" 3-7/8"
ROUND TRIM HOLDER SQUARE TRIM HOLDER
Align the cut out section of drywall with the trim holder
and install the drywall.
2
2
DRYWALL
TRIM HOLDER JOIST
4B