Elem Garden Technic 5411074169343, Оригинальное руководство пользователя

Страница: 147 / 181

Page 147 de 181
branches, roots, etc.) that may cause the machine to slide sideways, tip over or
otherwise cause loss of control.
SLOW DOWN BEFORE CHANGING DIRECTION ON
SLOPES. Never use reverse to reduce speed going downhill: you may lose control
of the machine, particularly on slippery surfaces. Never ride the machine on slopes
in neutral or with the clutch out! Always engage a low gear and the parking brake
before leaving the machine at a stopped and unattended.
Take care when beginning forward movement on sloping
ground to prevent the risk of tipping up. Reduce the forward speed before going on
a slope, particularly downhill.
5.6 TRANSPORTING
If the machine is transported on a truck or trailer, use
ramps with suitable resistance, width and length. Load the machine with the
engine switched off, without a driver and pushed by an adequate number of
people. During transport, close the fuel stopcock (if fitted), lower the cutting deck,
engage the parking brake and fasten the machine securely with ropes or chains to
the hauling device.
5.7 ADVICE ON HOW TO OBTAIN A GOOD CUT
1. To keep a lawn green and soft with a good appearance, it should be cut regularly
without damaging the grass.
2.
It is always better to cut the grass when dry.