background image

15

7.1 Cleaning and care 

Avoid the influence of moisture (spray or rain water), dust and direct sunlight on the device. 

Only clean the device with a dry linen cloth, which can be slightly damp if it is heavily soiled. 

Do not use solvent-based cleaning agents for cleaning. 

7. GENERAL 

Elektrotechnik Schabus GmbH & Co. KG is not liable for damage and / or loss of any kind, 

such as individual or consequential damage, resulting from the gas detector not giving an 

alarm signal despite the increased gas concentration.

In order to be able to guarantee perfect functionality at all times, you should have the sensor 

checked after 5 years to be on the safe side, or replaced after 10 years at the latest. 

7.2 Declaration of Conformity

The conformity of this device with the EU directives is confirmed by the CE mark on the 

device. The declaration of conformity can be found under 

[email protected] 

can be requested.

All rights, technical changes, errors and misprints reserved.

7.3 Warranty

On  your  electronic  product  from  Elektrotechnik  Schabus,  we  grant  a  legal  guarantee  for 

material defects and quality defects from the date of purchase. Elektrotechnik Schabus will 

repair or replace your device free of charge, under the following conditions:

• 

In  the  event  of  a  statutory  warranty,  the  device  must  be  sent  in  with  the  following 

documents: description of the fault, proof of purchase as well as your address and delivery 

address (name, telephone number, street, house number, postcode, city, country).

• 

Devices  that  are  returned  to  Elektrotechnik  Schabus  must  be  adequately  packed. 

Elektrotechnik Schabus assumes no liability for damage or loss during shipping.

• 

The device must have been used in accordance with the instructions for use. 

Elektrotechnik  Schabus  assumes  no  liability  for  damage  caused  by  accident,  misuse, 

modification or negligence.

• 

Elektrotechnik Schabus assumes no liability for loss, damage or expenditure of any kind 

resulting from the use of the devices or accessories.

• 

The warranty does not affect your statutory rights as a consumer. 

7.4 Returns

If your device is defective, please contact us:

 E-Mail 

[email protected]

Please provide your full address and the reason for the return. We will arrange for the package 

to be picked up for you free of charge (only within Germany). Under no circumstances should 

you send us a non-free parcel, we will not accept it! You will be charged retrospectively for 

unauthorized returns that do not constitute a complaint.

Содержание 300266

















Отзывы: