E-E mode
E-12
ElektroPhysik
5. Scan
: This mode is recommended to measure the high temperature
work-piece
《
6.4.1.2
》
E-E mode
The Echo-to-Echo option allows you to make measurements between two
consecutive back wall echoes. Therefore, a good usage of the
Echo-to-Echo option is for measuring through coatings to measure only
the true metal thickness.
Note: The probe U5.0E is available for this function only.
〖
6.4.2
〗
Sound velocity
Sound velocity plays an important role in measurement. Different material
is of different sound velocity. When the sound velocity is incorrect, it will
cause wrong measured results. There are two ways to select the material's
sound velocity, which are “Materials selection” and “velocity custom”.
1. Press key, select “Velocity”, the screen will display as
follows:
2. Press
or
to select the options. Press “
OK
” to confirm.
Содержание MiniTest 440
Страница 8: ......
