HS 12/24-120
Operation
After selecting, for example, a gel battery, in the line gassing
voltage the end-of-charge voltage can be reduced with the
"right / left" arrows (here 13.8 volts). The menu can be left
again via the outer "right" arrow. Before, you will be asked to
confirm as usual whether the setting should be saved with the
"Yes / No" keys.
In this example, the selected gel battery was stored with an
end-of-charge voltage of 13.8 volts. This is also displayed in
the “Charge Mode” stand-by screen.
4.9.3
De-sulphating program
For wet batteries, you can choose a de-sulphating program
that charges with a small current over 21 hours to the end of
charge voltage of 15 volts. Light sulphating formation can be
restored again.
With the "ON / OFF" keys the de-sulphating program can be
switched on and back off. This is possible only if the battery
type "wet" has been selected; for other types, the line is
locked.
After switching on, you can exit the menu again by the outer
"right" key and get back to "Charge Mode" by confirming with
the key “Yes”.
Now the charging parameters for the de-sulphating program
are displayed and the battery will be charged for a maximum of
21 hours with 1.5 Amps. During the charging process the
voltage rises to exactly 15 volts. The charged capacity in
ampere-hours and the elapsed time will be displayed
additionally.
