Elektrom digitakt, Быстрое руководство

Страница: 23 / 36

23
6. ABOUT THE TRACKS
6.1 THE AUDIO TRACKS
The Digitakt has eight audio tracks. Each audio track contains one sound and the parame-
ter settings in the PARAMETER pages TRIG, SRC, FLTR, AMP, and LFO.
To select an audio track to edit, press and hold
[TRK] key and then press one of the
[TRIG 1–8] keys.
6.2 THE MIDI TRACKS
The Digitakt also has eight dedicated MIDI tracks. The MIDI tracks are used to control
external MIDI-equipped gear. Each MIDI track can trigger a chord of up to 4 notes with
adjustable parameters such as velocity and length, control pitch bend and aftertouch as
well as 8 freely assignable MIDI control change parameters (MIDI CCs).
The MIDI tracks function almost the same way as the Audio tracks, with features such as
parameter locks, LFO modulation, micro timing, trig conditions, individual track length and
time signature settings.
To select a MIDI track to edit, press and hold
[TRK] key and then press one of the [TRIG
9–16] keys.
6.3 EDITING THE TRACKS
The five [PARAMETER] keys open parameter pages that are used for editing the tracks.
The TRIG page contains different parameters such as NOTE , VELOCITY , and other trig
related parameters. The SRC page hosts the parameters that deal with sample selection
and editing of samples on audio tracks. For MIDI tracks this page has parameters such as
CHANNEL , PROGRAM , and AFTERTOUCH . On the FLTR page, you find parameters for
the multimode filter and its filter envelope for the audio tracks. The AMP page for audio
tracks hosts parameters for the amplitude envelope and effect sends. On MIDI tracks you
find the CC settings here. Finally, the LFO page hosts LFO parameters for the active track.
Use the
DATA ENTRY
knobs
A-H
to edit the corresponding parameters. Press and turn a
knob to adjust its parameter in larger increments.