7
PROG FUNCTION
program defining
- press
and by
button select
PROG
function
(PROGRAMMING)
confirm by pressing
- by pressing
select the day, which should be
programmed according to following table:
i
Fce
d:1 Monday
d:2 Tuesday
d:3 Wednesday
d:4 Thursday
d1:5 Monday to Friday
d6:7 Saturday to Sunday
d1:7 whole week
d:5 Friday
d:6 Saturday
d:7 Sunday
TABLE: SELECTION OF DAY TO BE PROGRAMMED
- when the day is selected, press
and symbol
1:U1
is
displayed, so that you can set the first time interval
- by pressing
set the time of the first change
(min. step: 10min.)
- by repeated pressing of
assign required temperature
to this time
- again confirm by pressing
and the display automatically
shows symbol
1:U2
for the second time interval in the first day.
P
i
i
- this procedure should be repeated until all time intervals (max.6) are set and
afterwards leave the programming mode by pressing
.
- select
AUTO
function and the socket starts to function according to defined
program.
Fce
Indication of socket condition in autonomous mode:
symbol AUTO(or MANU) on the display IS ALIGHT
= connected appliance is
SWITCHED ON
symbol AUTO(or MANU) on the display FLASHES
= connected appliance is
SWITCHED OFF
EXAMPLE
definition of weekly program
1, Set for 18°C (PA:r2)
2, Set for 23°C (PA:r3)
3, Set
P
for 25°C (PA:r4)
4, Select programming of whole week
d1:7
(Prog)
5, Assign the time of 6:00 and temperature to
17:U1
6, Assign the time of 9:00 and temperature to
17:U2
7, Assign the time of 13:00 and temperature to
17:U3
8, Assign the time of 16:00 and temperature to
17:U4
9, Assign the time of 19:00 and
P
temperature to
17:U5
10,Assign the time of 22:00 and temperature to
17:U6
11,
Leave the programming mode by pressing
and select
AUTO
func.
Fce
representation of
program course on LCD