INSTALATION AND ACTIVATION PROCEDURE
BPT003 is used for switching the heating device in connec-tion with the BPT010 or BPT710
thermostat.
Abb. 1
Abb. 2
GREEN DIODE
(LED1)
RED DIODE
(LED1)
Child safety
FUNCTION
BUTTON
FUNCTION BUTTON:
SHORT PRESSING - coding.
LONG PRESSING (for about 5 s) - RESET
Deleting the code from the memory (the green and red
LEDs flash simultaneously).
1. Connect receiver in 230V/50 Hz socket
2. The green diode flashes on the receiver; thus the receiver is
ready for further setting.
3. Shortly press the FUNCTION BUTTON (see pic.2) for about
1.5 s (the green and red diode are flashing alternately).
4. Activate the receiver on the thermostat (transmitter)
according to the manual for the given transmitter (BPT010
or BPT710).
5. If the code has been learned correctly, the
green and red
diodes flash simultaneously.
INDICATION DIODES
TECHNICAL PARAMETERS
LED 1 LED 2
FUNCTION
empty memory, code not learned
Code learnd
FLASHING ALTERNATELY= code learning mode
FLASHING SIMULTANEOUSLY= code has been learned
SIMULTANEOUS LONG FLASH= code was ERASED
relay switched
ERROR (if no signal is received from thetran-
smitter within approx. 6 hours, it switches tothe
2-min-ON / 8-min-OFF mode). LED flashes only if
the relay is on, i.e. for 2 minutes.
MADE IN CZECH REPUBLIC
Pb
LEAD FREE
Im Einklang mit RoHS
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216
www.elbock.cz
Power supply
230 V/ 50 Hz
Communication type two-way
Frequency
433,92 MHz
Sensitivity
< - 95 dBm
Range
200 m
(in free area)
, 25 m
(in built-up
area)
Output
relay, max.16A/ 250 VAC
Protection
IP40
Working temp.
0 to 40°C
Dimensions(LxBxH) 109 mm x 80 mm x 31mm
EXPLANATION: LIT UNLIT FLASHING
DECLARATION OF CONFORMITY
We, ELEKTROBOCK CZ s.r.o., herewith declare that our
product BPT003 is in conformity with the basic requirements
and other respective provisions of the directive 1999/5/ES.
Issued: 1.04.2012
CERTIFICATE OF GUARANTEE
(guarantee period for the product amounts to 2 years)
product No.:
examined by::
date of sale::
stamp of shop:
Send the product for guarantee and after
guarantee service to manufacturer’s address.
