elektraLite eyeBall UV, Руководство пользователя

Страница: 8 / 12

2). Reset
This resets all values to their default.
Go through the Root Menu until
Settings is displayed. Press Enter and then use the ↑ or ↓ buttons to get
to RESET. Press Enter. The display will have the cursor flashing across the bottom. The password needs
to be entered. The password is the following sequence using the ↑ and ↓ buttons.
↑ ↓ ↑ ↓ ↑ ↓ then press Enter once complete. The display will read OK followed by a return to the
RESET sub menu. The Menu button will need pressing to return to the Root Menu. Only once at the Root
Menu will the dmx control function once more. Please note the Reset also takes the dmx address back to
001.
13
.
Fans
There are several different control options for the fans.
Auto:- The fans come on when the temperature exceeds its pre-set value.
The fan turns off when the temperature falls below its pre-set value.
High:- The fans are constantly on at a high rotational speed.
Normal:- The fans are constantly on at their normal rotational speed.
Low:- The fans are constantly on at a lower than normal level. If the leds exceed their operational pre-set
temperature level, then the output is reduced as the fans are "locked" at lower rotational speed.
Off:- The fans are sent to be OFF. . If the leds exceed their operational pre-set temperature level, then the
output is reduced as the fans are "locked" OFF.
14. Key Lock
The Key function is an access password for the fixture. The KEY can be turned OFF or ON which then
deactivates or activates the password.
To set the
KEY LOCK on, go through the Root Menu until KEY LOCK is found . Press Enter and use the ↑
or ↓ to set the KEY LOCK to either OFF or ON. If the Key LOCK is turned ON then a password is
required to go into sensitive Menus and to change functions.
The password is ↑ ↓ ↑ ↓ ↑ ↓ (Up + Down + Up + Down + Up + Down) Enter.