ELEKTRA VCD10, Руководство по установке

Страница: 14 / 72

ELEKTRA
Heating Cables
Stage 3: After the heating
cable has been laid
At this stage, it is necessary to undertake the fol-
lowing steps:
• stick into the Warranty Card the self-adhesive
label, positioned on the power supply con-
ductor of the heating cable,
• feed the power supply conductor of the heat-
ing cable into the installation box through
the protective conduit mounted at the stage
of electric works,
• install the floor sensor centred between the
heating cables and secure it with the installa-
tion tape,
• feed the temperature sensor’s cable into the
installation box through the protective con -
duit mounted at the stage of electric works,
The heating cable should be separated from the
walls and fixed furnishings with the distance
equal to planned cable spacing.
14