ELEKTRA SnowTec, Руководство по установке

Страница: 9 / 84

The heating mat layout should be commenced
from the side of the power supply, in such a way
to enable easy reach to the electricity supply. If
the cold tail needs to be extended, a heat shrink
joint should be used, ensuring that the connec-
tion is safely sealed.
Installation
Stage 1: Heating mat’s
installation
The heating mat can be laid:
•
in the layer of sand constituting
the base for the asphalt, flagstones
or paving cobbles surfaces,
• directly in concrete,
• directly in asphalt
(exclusively SnowTec
®
Tuff
).
ELEKTRA SMCG controller – max. load up to 2x16
A.
For applications in extended heating systems.
Enables remote operation via a web browser and
signaling of operating status or errors.
As standard, equipped with one temperature and
moisture sensor and an installation tube. Addi-
tional temperature and moisture sensor can be
connected to this controller, which will enable
protection of two outdoor areas.
9