3.2.5 Strongbox (optional)
The Strongbox (Part # 212.006) provides long-term surveillance and monitoring of bat habitats. It protects the
BATLOGGER against weather and allows to run it independently up to 19 nights.
•
Before using the Strongbox its battery must be fully charged with the special charger supplied. Please refer
to the instructions of the charger.
Using the BATLOGGER with the Strongbox:
1. Remove the ultrasonic microphone from the BATLOGGER.
2. Plug in the power plug of the Strongbox into the power supply connector of the BATLOGGER.
3. Plug in the microphone extension cable into the microphone jack of the BATLOGGER.
4. Plug in the ultrasonic microphone into the protective tube of the microphone extension. Make sure the
microphone is plugged in completely until dead stop to ensure maximum contact. To remove the
microphone from the protective tube, insert the included hose through the microphone and pull the hose
with the microphone out of the tube gently.
5. Place the BATLOGGER into the Strongbox.
6. Turn on the BATLOGGER and put it into record mode. Settings to trigger and recording time windows are
shown below.
7. Close the Strongbox. The microphone extension cable must be clamped into the provided opening of the
Strongbox on the blue-clad parts of the cable. Take care that the Strongbox is closed completely to ensure
proper sealing.
BATLOGGER Manual
Elekon AG Nov. 2012
7/28
Stromstecker
Ladebuchse
