●Product Information
●
P
ro
d
u
c
t I
n
fo
rm
a
tio
n
●
Outline
SPIN SHOOTER is a do-it-yourself mechanical kit to make a six-legged machine with three
motors, operated by a wired controller.
The moving features of SPIN SHOOTER are: forward, backward, right and left turns, made by
its controller. With the motor in the shooting system, it can throw the ball powerfully to get a
goal. Creative performance fields and rules will make your game more exciting.
●
Specifications
Power Source / “AA” alkaline battery X 4 pcs
(not included)
Power Consumption / Maximum approx. 900 mA
(when all three motors operating)
Approx. average 550 mA
Battery Duration / Approx. 2.5 hours
(continuous operation average)
Size / Body: W85 X H140 X D170 (mm)
(projection not included)
Controller: W95 X H126 X D31 (mm)
(projection not included)
Wire: 2m
SPIN SHOOTER MR- 9002E
Certain technical terms are used in this instruction
manual due to give you specific knowledge about
electronics and mechanics, which will help you to
understand other technical texts in the future.
【
Colored example
】
* For coloring the machine, carefully read the
“Notes for coloring” on page 40, in advance.
3
CAUTION
◆
P ay attention to the following instructions for the use of batteries.
1. Place the batteries in the correct polarity (+ & -).
2. Never short-circuit, dismantle, heat the batteries, or dispose of them in a fire. They may leak
or explode and cause injury.
3. When you finish playing, remove the battery. Exhausted batteries are to be removed from
the product.
4. Do not wet the batteries or battery holder. If they get wet, remove the batteries from the hold-
er and wipe them off thoroughly.
5. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or recharge-
able (nickel-cadmium) batteries. Do not use the rechargeable batteries. Use only the bat-
teries of the same types as recommended.
