Eleiko 3085578, Руководство пользователя

Страница: 21 / 24

1
2
3
4
5
6
1
2
3
4
5
6
- 21 -
PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE: The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.
Regularly:
· Clean surfaces on the frames and tubes from dust and dirt.
· Check that all bolts between parts, walls and floors are properly tightened, according to
recommendations.
· Check equipment for sharp edges. Replace parts with sharp edges.
When used intensively it is recommended to switch places on both the Bonded Foam plates and the ARP plates in
order to achieve a more even wear and to improve the performance and the lifetime of the platform.
See also www.eleiko.com.
SPARE PARTS AND SERVICE
Contact Eleiko for spare parts and service:
Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: info@eleiko.com | Phone: +46 35 17 70 70
WARRANTY
All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in
workmanship and / or materials under normal use or service as follows:
· 10 years on structural frame welds (NOT on moving parts)
Normal wear and tear do not fall under the 10-year warranty.
CARE AND MAINTENANCE