Eleiko 3085245-060 Скачать руководство пользователя страница 2

CAUTION

The equipment must be installed and used in a place whose access and supervision are specifically controlled by 

the owner.

Be sure to install the equipment on a stable base and properly level the equipment. ELEIKO recommends that all 

equipment is secured to floor and installed by a licensed contractor or an ELEIKO-installer. 

SAFETY  INSTRUCTIONS

It is the responibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on 

proper usage of the equipment.

1.

 All included warnings (labels) and instructions 

MUST

 be read

 

before the use of any ELEIKO-equipment. Use 

each equipment as it is intended for. 

2.

 A user 

MUST

 get a medical examination and proper instructions before the use of any ELEIKO-equipment. 

3.

 

DO NOT

 let anyone, under any cuircumstances, use equipment that appears to be damaged. Do not try to 

repair any equipment before consulting an ELEIKO technician. 

4.

 

DO NOT

 replace the components of ELEIKO-equipment with other none

 

ELEIKO-equipment (magnetic safety 

pin, frames, bars), do not improvise. If there are any doubts consult an ELEIKO representative prior to any 

intervention. 

5.

 

DO NOT

 overload the equipment and 

DO NOT

 try to exceed personal strength levels. 

6.

 Children under the age of 14 must be supervised by an adult. 

7.

 

DO NOT

 remove any safety labels from the ELEIKO-equipment. ELEIKO is not responsible if a label is 

removed. Replace damaged labels immediately.

8.

 Eleiko package for products can be made of wood, be aware of splinters, MUST use gloves and proper work 

wear.

9.

 Eleiko package material could be a risk when handling, be aware of crushing, MUST use work wear including 

gloves and hard shoes.

10

. Eleiko products and packing material is heavy, MUST use proper lifting technique, work wear and hard shoes.

PREVENTITIVE  MAINTENANCE  &  INSPECTIONS 

DAILY:

Cleaning of upholstery.

REGULARLY:

Clean the surfaces on frames and tubes from dust and dirt.

Check that all bolts between parts, walls, floors are properly tightened, according to recommendations. Check 

euipment for sharp edges, replace parts with sharp edges.  

WARRANTY

All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in 

workmanship and / or materials under normal use or service as follows:

10 years on welds on structural frame (NOT on moving parts)

1 year on upholstery

Normal wear and tear does not fall under the warranty of 10 years.

ADDITIONAL INFORMATION

This equipment is for indoor use only. 

READ BEFORE INSTALLATION AND USE

Содержание 3085245-060













Отзывы: