- 11 -
PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE:
The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.
Daily:
· Cleaning of upholstery.
Regularly:
· Clean surfaces on the frames and tubes from dust and dirt.
· Check that all bolts between parts, walls and floors are properly tightened, according to
recommendations.
· Check equipment for sharp edges. Replace parts with sharp edges.
See also www.eleiko.com.
SPARE PARTS AND SERVICE
Contact Eleiko for spare parts and service:
Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: +46 35 17 70 70
WARRANTY
All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in
workmanship and / or materials under normal use or service as follows:
· 10 years on structural frame welds (NOT on moving parts)
· 1 year on upholstery
Normal wear and tear do not fall under the 10-year warranty.
CARE AND MAINTENANCE
