C O M P O N E N T
PA R T S
A N D
F I T T I N G S
Safety
Warning
IMPORTANT
PLEASE
READ
THE
INSTRUCTIONS
BEFORE
SET
UP
AND
INSTALLATION
Cabinet x1
Suggested
Tools
:
Drill
Screw driver
Screw & Wall
plug
x
4
(Included in pack)
Silicon plug
x
20
(Included in pack)
Glass shelf bracket
x
12
(Included in pack)
Hinge cover
x
3
(Included in pack)
Wire nut
x
3
(Included in pack)
M01
M04
M02
M03
M05
M07
Glass shelf
x
3
(Included in pack)
Caution
:
Safety
:
• We
suggest
you
spend
a
short
time
reading
the
instruction
leaflet
.
• Carefully check that you have all the parts before beginning assembly.
• Keep small parts and fittings out of children's reach and keep children well away from construction
area
,
as
the
unassembled
product
contains
small
parts
,
which
could
present
a
choking
hazard
.
• We suggest you retain these instructions for future reference.
• This appliance can be used by adults ONLY.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified
persons
in
order
to
avoid
a
hazard
.
• In order to avoid overheating, do not cover the mirror.
• Switch off the mains supply and remove the appropriate fuse or switch off the appropriate circuit
breaker before commencing installation
• Make sure that there is no danger that the cord or extension cord is inadvertently be pulled or cause
anyone
to
trip
when
in
use
.
Page 2
•
Note that this is a hardwired installation and does not come with a power switch. Your electrician
must install the hardwired mirror to an electrical junction box to connect to a room light switch to
turn off or turn on the mirror.
Note that this mirror does not come with a dimmer.
