Electrovision ZV002, Руководство пользователя, Страница: 7 / 8

card is full, the device will delete the first video file automatically
and overwrite.
5. The Infrared video recording function: this will be turned on
automatically under low-light circumstances
6.
Shooting while charging
1. Turn the unit ON.
2. Press the “MODE” button to enter into video recording
mode.
3. Press the “SELECT” button, a red DOT will appear in the top center
of the display.
4. Loop recording: During recording, the device will save each file
according to the Video Time set in the menu settings. When the SD
card is full, the device will delete the first video file automatically
and overwrite.
5. Press the “Select” button again to pause.
Notes:
i. The function above cannot be done when you connect
the device to PCs.
ii. The device will turn on and begin video recording when
your car is started. It will save video files automatically
and be switched off 5 minutes after a car is stopped
Audio Recording Mode
1. Press “OK” button to get started.
2. Press the “OK” button again in the audio recording state to stop
recording and save the audio file.
3. Press the “DOWN” button to pause or begin recording again.
Playback Mode
1. Press the “Mode” button three times to enter into playback mode.
The upper left corner of screen will display the payback icon.
2. Press the “ DOWN/UP” button to choose the files