Electrovaya Scribbler SC300, Руководство пользователя

Страница: 45 / 61

battery or plug in the AC Adapter.
Note!
Be careful not to confuse the battery light with the on/off light. When the on/off light flashes
amber, it indicates that the system is suspended (using the operating system Standby
command).
6.1.4 How to Determining the remaining battery power
Note!
Wait at least 16 seconds after turning on the computer before trying to monitor the remaining
battery power. The Scribbler needs this time to check the battery’s remaining capacity and
perform its calculations.
Click Start , then click Control Panel.
♦
♦
♦
Click Performance and Maintenance.
Click the Toshiba Power Saver icon.
The Power Saver Properties window appears. The current power source and battery power
remaining section displays the current charge state of the battery. The value is shown as a
percentage of the remaining battery charge.
6.1.5 Charging a drained battery
When the battery light starts flashing, you will need to charge the battery in order to save your
work. This is done as follows.
1. Unplug everything from the system. (For example, unplug the VGA cable.)
2. Place the system in standby mode.
3. Connect the AC adapter to the electric outlet. Plug in the AC Adapter into the
AC/DC Power Jack at the bottom of Scribbler
4. Return the system to operating mode.
AC Adaptor
The AC adaptor converts AC power to DC power and reduces the voltage to a controlled 12V
for the Scribbler. It can automatically adjust to any voltage from 100 to 240 volts and to a
frequency of either 50 or 60 hertz, enabling you to use the computer in almost any country.
Note! Use of the wrong adaptor may damage the Scribbler.
Note!
45