3
When the Paper feed button is pressed it will advance the paper until released.
The paper feed button is disabled during a print cycle.
If the button is ‘double clicked’ with the printer in an ‘awake’ status the printer
will enter the self-test mode.
Replacement paper & ribbon specification
PR2000S
Ribbon
Type
Impact 'Bond'
Paper Width
58 mm
Paper Thickness
70±5 µm
ERC-09
Outer Diameter
46 mm
Inner Core
12.5 mm
Part Number
AT4044
Serial Data Cable Connection
The printer is supplied with a dedicated serial data cable featuring an 8pin sub-
mini connector. This is the same shape as the mini USB connector that uses a 5
pin configuration.
DO NOT USE A SUB-MINI USB CABLE
- It will not fit!
The D9 connector has the following pin signals suitable for PC connection.
Pin No.
Signal
Name
Function
Printer
Host
1
3
RxD
Receive Data
2
2
TxD
Transmit Data
3
7
CTS
Clear to Send
4
8
RTS
Ready to Send
5
5
GND
Ground
-
4
DTR
Linked in D9 connector.
Not used by printer.
-
6
DSR
Full technical data available by contacting
