Electronics TSP-M Скачать руководство пользователя страница 12

12 

Electronics Inc. • (574) 256-5001 • www.electronics-inc.com 

 

Limited Warranty 

The warranty obligations of Electronics Inc. for the TSP-M are limited to the terms set forth below. 
 

Length of Warranty Period 

This  limited  warranty  lasts  one  (1)  year  from  the  shipping  date  of  this  product  from  Electronics  Inc.  or  its 
authorized distributor. 

 
What is Covered 

This limited warranty covers defects in materials and workmanship in this product. 
 

What is Not Covered 

This limited warranty does not cover any damage or deterioration of this product resulting from any alteration or 
modification, improper or unreasonable use or maintenance, or improper handling or storage. 
 

How to Obtain a Remedy Under This Limited Warranty 

To obtain a remedy under this limited warranty, contact Electronics Inc. or distributor from whom this product was 
purchased. If it is determined that this product must be returned under this limited warranty, a Returned Goods 
number (RG), obtained from Electronics Inc., will be required. This product should be properly packed, preferably 
in  the  original  carton,  for  shipping.  Cartons  not  bearing  a  RG  number  will  require  additional  processing  time. 
Shipping and insurance charges must be prepaid; Electronics Inc. is not responsible for these expenses. 
 

What Electronics Inc. Will Do Under This Limited Warranty

  

Electronics Inc. will, at its sole discretion, provide one of the following two remedies to whatever extent it shall 
deem necessary to satisfy a proper claim under this limited warranty: 
 
1) Repair the product. Electronics Inc. will pay the shipping costs necessary to return this product to the customer 
once the repair is complete. 
 
2) Replace this product with a comparable current model. Electronics Inc. will pay the shipping costs necessary to 

replace this product. 
 

Limitation on Liability 

The maximum liability of Electronics Inc. under this limited warranty shall not exceed the actual purchase price 
paid  for  the  product.  Electronics  Inc.  is  not  responsible  for  direct,  special,  incidental  or  consequential  damages 
resulting  from  any  breach  of  warranty  or  condition,  or  under  any  other  legal  theory  to  the  maximum  extent 
permitted by law. 
 

Exclusive Remedy  

To the maximum extent permitted by law, this limited warranty and the remedies set forth above are exclusive 
and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied. To the 
maximum extent permitted by law, Electronics Inc. specifically disclaims any and all implied warranties, including, 
without  limitation,  warranties  of  merchantability  and  fitness  for  a  particular  purpose.  If  Electronics  Inc.  cannot 
lawfully  disclaim  or  exclude  implied  warranties  under  applicable  law,  then  all  implied  warranties  covering  this 
product, including warranties of merchantability and fitness for a particular purpose, shall apply to this product as 

provided under applicable law.  
 

Rights under State Law 

This warranty defines specific legal rights relative to these products provided by Electronics Inc. Legal rights may 
also vary from state to state. 
 
 

 
 

Содержание TSP-M

























Отзывы: