Electronics SP44, Руководство пользователя

Страница: 8 / 16

8
Manual SP-44
- DEFAULT SETTINGS - the controller
has pre-programmed settings; we can
go back to those settings at any time.
However we need to remember, that all
personal settings will be lost.
DEFAULT SETTINGS
DEFAULT SETTINGS
YES
- END OF WORK - turning off the
controller in order to turn it on again - we
need to press and hold the EXIT button.
END OF WORK
END OF WORK
YES
INSTALL SETTINGS
- INSTALLATION SETTINGS
ESTINGUISH. TIME
ESTINGUISH. TIME
60 MIN
EXTINGUISHING TIME - this function is
used to set time which measured after
reaching the temperature lower that the
one set at extinguishing temperature
point. Once the set time passes the
controller shuts down the cauldron and
communicates lack of fuel.
- EXTINGUISHING TEMPERATURE -
this function is used to set central
heating temperature below which the
time set at the extinguishing time is
being counted down. Once the
temperature is below the temperature
set and after the time passes the
controller terminates operations and
communicates lack of fuel.’’
ESTINGUISH.
TEMPERATURE
ESTINGUISH.
o
TEMPERATURE 35 C
Setting those settings incorretly may cause extinguishing the cauldron
although the fuel has not been completly burned.