T-12 User Manual
®
JUNE 2004
070-0740-00 T-12 USER MANUAL
Page 3 of 5
Patching
The T-12 can patch any of 512 dimmers to any of its 12 channels. To enter Patch mode, press ON and
Preset 2 simultaneously and hold for 5 seconds. The alphanumeric display will show the last selected
dimmer address. Dimmers are selected by pressing the UP and DOWN arrows of the master channel.
To patch a dimmer to a particular channel, press the UP button for that channel. Its bottom bar graph
LED will light. It is possible to patch multiple dimmers to a channel. To unpatch a dimmer, press the
DOWN button for the channel it is patched to. To exit patch mode, press the ON button.
Assigning Nondim Channels
To assign a channel to always be at full intensity, or “nondim,” press and hold the ON button, and double
press the UP level control button for the desired channel. This selection must be made in less than 2
seconds.
To reenable dimming on the channel, press and hold the ON button and double press the desired chan-
nel’s DOWN level control button. This selection must be made in less than 2 seconds.
Activating a Preset
To display a preset look, press its preset button. The existing look will fade into the new look.
A total of 10 preset looks are available on the T-12, including presets 1 through 8 and the ON and OFF
buttons.
ALPHANUMERIC
DISPLAY
MASTER
BARGRAPH
MASTER
LEVEL
CONTROL
CHANNEL LEVEL CONTROLS (1-12)
CHANNEL BARGRAPHS (1-12)
P
R
E
S
E
T
S
1 2
4
3
5 6
7 8
OFF ON
U
P
D
O
W
N
