The material contained in this document is the property of Electronics & Innovation Ltd., it is subject to
change without notice.
Dec 2017 Revision A
3
Chapter 1 Introduction
The 500S06 is a broadband solid state amplifier covering the frequency spectrum from 20
to 600 KHz. It is rated at 500 watts of RF power with low harmonic and intermodulation
distortion. A Class D design, the 500S06 will amplify inputs of AM, FM, SSB, pulse and
any complex modulation signals within the bandwidth of the amplifier. The amplifier has
57 dB gain, it is unconditionally stable and will not oscillate even with combinations of
mismatched source and load impedance. It is protected against failure due to output load
mismatch and/or overdrive.
1.2 INSTRUMENTATION IDENTIFICATION
Each amplifier is identified by a serial number tag on the back panel of the unit. Both the
model number and the serial number should be quoted to identify specific unit.
1.3 SPECIFICATIONS
Physical and electrical specifications are listed in Table 1-1 below
