Electronic Systems Protection NEXT GEN PCS 120, Руководство пользователя

Страница: 13 / 28

User Manual
11
© Electronic Systems Protection, Inc. / 03.08.13 / espei.com
/
nextgenpcs.com
b. Clearing Memory:
The Next Gen PCS Filter is able to timestamp the 60 most recent power quality
events (information stored in microcontroller non-volatile memory). The
microcontroller memory contents can be cleared at any time by following one of
these two methods:
i. RST Button:
There is a recessed push button located on the far right of the front
endplate (the end plate that contains the RJ45 and RJ11 and modular
jacks).
Follow these steps to clear the device memory:
1.
Unplug the input cord of the Next Gen PCS Filter from the branch
circuit outlet.
2.
Using a paperclip or small screwdriver, press and hold the RST
button.
3.
Plug the input cord of the Next Gen PCS Filter into a properly
grounded and compatible branch circuit outlet, while continuing to
hold the
RST button.
4.
Wait approximately 3-5 seconds; the LCD Event Monitor will now
display
“cLr”; release the
RST button and the device
microcontroller memory will now be cleared.
ii. Diagnostic Software:
The device microcontroller memory may alternately be cleared from within
the Diagnostic Software in the following location:
“Tools/Clear Device
Memory”. See Section IV– 4- C: Tools Menu, for details.
2.
Next Gen PCS Data Interface Cable
a. Overview
i. The Next Gen PCS Data Interface Cable consists of a
USB connection on one end, and a RJ-11 connection on
the opposite end.
ii. The USB connection plugs into an available USB port on
your PC. The RJ-11 connection plugs into the RJ-11
“OUT” Jack (labeled “Data Port”) on the Next Gen PCS
Filter, which is the jack closest to the LCD Event Monitor
and RST button.