![Electronic.Star Duramaxx Wildkamera 10021389 Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/electronic-star/duramaxx-wildkamera-10021389/duramaxx-wildkamera-10021389_user-manual_2385850017.webp)
Setting for Motion Sensor Operation (PIR Sensor)
The settings explained below is referred to keys on the lower portion of the inner panel. See the
Fig.3
Select ON DUTY for Day, Night or 24 hours
The
WORK
button is pressed once to enter the 24 HOUR > NIGHT > DAY options, the 24 (Clock) On Duty
icons will remain blinking. Press again to move the blinking icon to the SUN icon, one more pressing will
move it to the Moon. Press the OK/DEL key on your right to accept for the desired icon and then it become
stable. The
Clock
icon is represented for motion detection will be valid day and night. The
SUN
is
represented for day working. The
MOON
is represented for Night working only. If ON Duty is effective, a
Radar icon will run with radiation to show the device can sense any motion in this period.
Select for Quick Shot
Quick Shot allows for more images to be taken if
additional motions may be detected
after the 1
st
image and the camera does not shut down to be ready for more instant shots. If the Burst mode is set for
OFF, you can choose 1~3 images which will allow to shot between every 20 seconds for an event in order to
take a group animals passing-by. “1” is the default that only one picture to be taken and then goes to
PAUSE time. “2” or “3” will re-arm the sensor for taking the second and third picture if more animals are
following.
(Example of use: On a trail when you want a picture of what is following the first
young deer. Like a smart buck, it always walk at the last).
A time-out of each shot is around 20
seconds. The system will goes to Pause mode after a total number of events are done or time-out.
Note: This function is not the same as the burst mode. They will be used with difference purposes.
Pause Time
This is a time of silent between the motion sensor does able to detect event for a capture. The sensor will
not work within the gap. You can select 00, 01, 03, 05, 10, 20, 30, 45, 60 minutes for a PAUSE option.
Press the PAUSE button once to enter for setting, The default 01 will be blinking. Press again to change it
until the desired choice appears. Press OK/DEL on right to accept it.
Change for Movie Length
This option will let you determine how long for each video to take. There are 3, 5, 10, 20, 30, 45, 60, 90
seconds of video length to be selected. The PAUSE key is shared for two functions. Press and hold the
PAUSE key for 3 seconds, a blinking video camera icon will appear to let you know you already do enter for
video length setting. Then press PAUSE repeatedly until your desired length appears
.
Confirm updated
change by the OK/DEL key.
NOTE: You must also select VIDEO option in the camera setting when you wish to take video clips.
Otherwise, the device still does take pictures.
OK/DEL
It is a key for shared with two functions. Any time you have done to program the WORK, Q-SHOT and
PAUSE / Video Length, just press the OK/DEL key to accept the new change. On the other hand, press and
hold it with 3 seconds, it perform the DELETE function that all event counts on the lower LCD will be
cleared. But it is not effect to any contents in the camera memory
Event Counter
Three digits in the center of the lower LCD are the event counter which let you know how many motion
records that up to 999 events for a trail history. If you want to renew the counter anytime, simply to press
and hold the OK/DEL button until LCD become blinking, then it will resume to [000].
Battery Icon
Three icons are for difference battery groups. The Bat-icon on the upper corner of right is represented for
motion sensor power. The second on the right is for camera power. All Bat-icons will indicate three status as
below:
GOOD: Battery Icon show with solid.
LOW: Battery Icon is half blank.
BAD: Battery icon is totally blank.
Note: You have to replace all batteries in camera section or motion sensor section for new one
completely when either camera or motion power are BAD. Do not try to replace some of them
only. Please note that the motion sensor power is independent to the camera power system.
Mostly, the motion power will last much longer than IR light power.
Walk-Test / Sensitivity Adjustment
Содержание Duramaxx Wildkamera 10021389
Страница 1: ...Duramaxx Wildkamera 10021389 10021390 ...