To configure the display using the IR remote follow these instructions. The
“SET” button will be used to edit both lines. Keep pressing “SET” to rotate
through the edit mode.
Preset Top Line
Enter the
EDIT
mode
1.
To edit the top line, point the IR remote toward the center of the display. Press
the
“SET”
button until the LED dot in the lower right corner of the least
significant digit flashes.
2.
Enter the number you want displayed. Press “
SET
”.
Preset Bottom Line
Enter the
EDIT
mode
1.
To edit the bottom line, point the IR remote toward the center of the display.
Press the
“SET”
button until the LED dot in the lower right corner of the least
significant digit flashes.
2.
Enter the desired preset numbers
3.
Press the
“SET”
button to save
Change Increment value (Top Line)
1.
Press the “SET” button until the top line shows “00.00” . Display will show
current time increment duration
. It is set at the factory as a non-
incrementing number.
2.
Press the “
SET
” button until the current value is removed. Input the
desired time duration (in Seconds) and press “
SET
” to complete.
3.
Press the “
SET”
button once again. The
GOAL
line decimal point will flash to
show the display is now running.
4.
Input desired Increment value through the remote.
5.
Press the
“SET”
button to save
Notes
•
A photo-eye and reflective plate are provided with the sign. The reflective plate needs to
be installed in the direction the photo-eye is being pointed at. The photo-eye operates by
sending an infrared beam in the direction that it is being pointed. The plate will reflect the
IR beam back to the photo-eye thus incrementing the bottom line of the display. Each time
the beam is broken, the bottom line will increment by one.
________________________________________________________________________
Please visit our website for more information:
www.electronicdisplays.com
Or Call: 1-800-367-6056
Or Our Support Website:
http://edisupport.helpserve.com/
