BLUETOOTH 4 CHANNEL PWM DIMMER – DEM.214
User Manual.
(Ver.01)
ELECTRON S.A.
7 klm National Road Athens - Lamia, 68 Antiohias Str,
PROFESSIONAL LIGHTING SYSTEMS
N. Philadelphia, 143 41 Athens, Greece
[email protected], www.electron.gr
Tel. +30 210 2584240, Fax. +30 210 2584245
Select a name for your network and any other preference
that is required and press “Save”.
Now you have successfully created your own network!
Select “Show nearby devices” to add DEM.214 to your
network. DEM.214 should be power supplied, in order for it
to be visible at your Bluetooth device.
Note that you can add up to 250 DEM.214 devices into a
single evolution network (127 with Classic networks) or
less if you are already using some other Casambi
devices in the same network.
For more information about the network settings and the
Casambi app in general contact with ELECTRON S.A. or
visit Casambi’s web site.
Select “DEM.214” from the available devices for completing
the Bluetooth pairing between your device and DEM.214.
The device is finally ready for use. You can now control
DEM.214 from your Bluetooth device!
With a single “tap” on the device you can switch it “on” or
“off”. You can also “tap & hold” the device and then by
sliding your finger to left and to the right you can adjust the
output of DEM.214 from 0% to 100% accordingly.
Casambi app offers a lot of options such as creating Scenes,
Selecting new name for the device, Dimming range etc. The
Scene editing can be adjusted from this page under the
section “Scenes”, while the other settings can be accessed
by double “tapping” on the device. These custom setting can
be seen in the following picture.
