4
BEFORE STARTING
1. Always operate the cleaner with the dust container
installed.
2. Always operate the cleaner with the filter set property
installed.
3. Insert the hose until the catch clicks to engage (press the
catch to engage hose).
4. Attach the plastic tubes (Z7211) or metal tubes (Z7292) to
the hose handle and the floor nozzle.
5. Pull out the cable and plug it in.
6. Press the foot pedal to rewind the cable (take hold of the
plug to prevent it striking you).
7. Press the On/Off button to start the vacuum cleaner.
Adjust the suction power by using the linear suction con-
trol or the suction control on the hose handle.
GETTING THE BEST RESULTS
Hard floors:
Use the dual purpose floor nozzle with the left
pedal in position (8.)
Carpets:
Use the dual purpose floor nozzle with the
left pedal in position (9.)
Reduce suction power for rugs and fabrics.
Upholstered furniture:
Use the upholstery nozzle.
Skirting boards, crevices, corners, etc.:
Use the crevice
nozzle.
For the perfect care of your carpets:
use the turbo nozzle.
The rotary motion of its brush gently loosens short-pile car-
pets where the dirt has been trodden in. It removes stubborn
fluff and pet hairs.
1
2
3
4
5
6
7
8
9
z72xx_ifu_inside.qxp 2006.02.20. 17:08 Page 4
