10
3
IMPORTANT USER INFORMATION
Dear Customer, please read through these operating instructions
carefully. Above all, please observe the safety instructions on the first
few pages of this booklet. Please keep these operating instructions for
later reference and pass them on to any subsequent owner of this
appliance.
The safety standards of Electrolux electrical appliances are in keeping with
the recognised rules of technology and the laws governing the safety of
appliances. Prior to operating this appliance please familiarise yourself with
the following safety instructions:
Safety Instructions
•
Read all the instructions and only use the appliance for its intended
purpose.
•
The appliance must be switched off before plugging or unplugging it from
the wall socket. Do not pull on the electrical cord to remove the plug from
the wall socket.
•
Always remove the plug from the wall socket before attempting any form
of user maintenance or cleaning, as specified in this booklet.
•
Do not handle the plug with wet hands.
•
Do not operate the appliance with a damaged electrical cord or plug. If
the electrical cord is damaged it must be replaced by returning the product
to an authorised Electrolux service centre or similar qualified person to
avoid a hazard.
•
If the appliance has malfunctioned or been damaged in any manner return
the appliance to the nearest authorised Electrolux service centre for
examination, repair or adjustment.
•
Do not carry or drag the appliance by the electrical cord.
•
Keep the electrical cord away from heat, oil, sharp edges and rough or
1
Combination Upholstery \ Brush
nozzle.
2
Combination Crevice \ Brush nozzle
3 Combination floor nozzle
4 Telescopic extension tube
5 Caddy
6 Handle
7 Hose end
8 Dust container release button
9 Dust container
10 Filter indicator
11 HEPA filter
12 Cage filter
13 Cord rewind pedal
14 On\Off Pedal switch
15 Exhaust filter
16 Air outlet grille
TROUBLE SHOOTING
The appliance does not operate
•
The appliance may not be plugged into the wall socket.
•
The wall socket may be switched off.
Filter indicator lights up and stays on
•
The dust container is full. Empty the dust container and check the filters.
•
The filters are clogged. Clean or replace the filters.
Loss of suction
•
The hose, extension tubes or accessories may be blocked.
Switch the cleaner off and unplug it from the wall socket.
Remove the blockage.
•
The Filters may be clogged. Clean or replace filters.
•
The dust container is full. Empty the dust container and clean or replace
the filters.
Cleaner switches off during operation.
Note:
The motor is fitted with a thermal cut-out switch which will
automatically switch off the cleaner if the motor starts to overheat.
Should this happen please do the following:
•
Switch the cleaner off by pressing the on\off switch pedal and unplug
it from the wall socket.
•
Allow the cleaner to cool down for approximately 40 minutes.
•
During this period, check for blockages in the hose, extension tubes and
accessories. Check if the dust container is full or if the filters are clogged.
•
Once the cleaner has cooled down, the thermal cut-out switch resets
and the cleaner will be ready for use again.
Should the cleaner fail to operate, please contact your nearest authorized
Electrolux service center.
